Revival Gold Reports Positive Metallurgical Tests Results at Mercur

In This Article:

Revival Gold Inc.
Revival Gold Inc.

TORONTO, Sept. 09, 2024 (GLOBE NEWSWIRE) -- Revival Gold Inc. (TSX-V: RVG, OTCQX: RVLGF) (“Revival Gold” or the “Company”) is pleased to report positive results from the Company’s column leach metallurgical test program on representative samples from the Mercur Gold Project (“Mercur”) in Utah, U.S.A.

Five composite samples were developed from seven HQ core holes for testing. The composites were developed to be geologically and grade representative of the primary gold-bearing heap leachable host rocks at Mercur. The composites were crushed to 100% passing 12.5 mm (0.5 inch) and actively leached for seven weeks. The test program was undertaken by Kappes Cassiday & Associates (“KCA”) at KCA’s laboratory in Reno, Nevada. Results of were as follows:

  • Overall extraction rates for gold for the five column leach tests were 85%, 85%, 74%, 92%, and 82%. Table 1 describes the composites tested and compares the column leach test results against the applicable bottle roll test results.

  • Average sodium cyanide consumption for the column leach tests was 0.57 kg/T (1.14 lbs/t) and lime addition was 1.0 kg/T (2 lbs/t).

  • The column leach kinetics were rapid on all composites with 90% of the gold leached reporting to solution after only five days.

Table 1: Mercur Gold Project Column Leach Metallurgical Test Results

Composite

Total Gold Extracted (%)

Bottle Roll
(P80 0.106mm)

Bottle Roll
(P80 1.70mm)

Column Leach
(P80 9.5mm)

Lower Great Blue Limestone

87%

85%

85%

Silver Chert

85%

81%

85%

Magazine Sandstone 1

76%

68%

74%

Magazine Sandstone 2

91%

90%

92%

Other

81%

77%

82%

 

 

 

 

Together with historical operational and exploration data, these results demonstrate that Mercur host rocks are amenable to cyanide leaching for the recovery of gold. The results will be used to support heap leach recovery rate assumptions to be used in a Preliminary Economic Assessment (“PEA”) for Mercur targeted by Revival Gold for completion by the end of Q1 2025.

“We are very pleased with today’s metallurgical test results”, said Hugh Agro, President and CEO. “The mid-80’s percent average extraction rate and rapid leach kinetics for the five columns tested bode well for the upcoming Mercur PEA”, added Agro.

Qualified Person

John P.W. Meyer, Vice President, Engineering and Development, P.Eng., Revival Gold Inc. is the Company’s designated Qualified Person for this news release within the meaning of National Instrument 43-101 Standards of Disclosure for Mineral Projects and have reviewed and approved its scientific and technical content.

About Revival Gold

Revival Gold is a pure gold, mine developer operating in the western United States. The Company is advancing engineering and economic studies on the Mercur Gold Project in Utah and mine permitting preparations and ongoing exploration at the Beartrack-Arnett Gold Project located in Idaho.